Motorsport Hardware – 78mm Black Bullet Nose Stud Kit 12×1.5 (E-Series)

PART #: MHSTDKIT1215   Brand:
  • Perfect for F-Chassis or 12×1.5 Track/Race applications!
  • Extended thread design – Will accept up to a 20mm spacer
  • This is a complete stud kit


Includes Motorsport Hardware ISO/TS 16949 and ISO 9001 by TÜV certified studs, conical wheel nuts, and medium strength thread locker for installation

This wheel stud kit replaces your factory equipped lug bolts. Lug bolts are generally fine but they are not acceptable for track use and they also make changing wheels a real pain as well. This conversion kit includes Grade 10.9 wheel studs in an OEM black zinc finish.

Installation information: These studs have a hex drive on the end. IT can be used for installing the stud into the wheel hub but cannot be used for torquing the stud to the hub. Before installing the stud make sure the threads on the wheel hub are clean from debris, rust, or oils. You can use a thread chaser to clean the threads along with brake parts cleaner. Apply a few drops of the included thread locker to the short end of the stud and then thread into the wheel hub. For torquing the stud to the hub we recommend using the double nut method (ideally a flange nut) by jamming the two nuts together snug. Then torque the studs to 25 ft/lbs.

This is the NEW ALL-IN-ONE stud! Stronger, more versatile, and a better value!



WARNING: May contain items that are found to have compounds and/or chemicals known to the State of California to cause cancer, birth defects, and reproductive harm. For more info, please visit


[br_filter_single filter_id=2177] [br_filter_single filter_id=1998]